O’Connell’s 55 Series plows are the longest lasting plows on the market. With plows dating back to 1983 still being used today. While many updates have been introduced through the years, the general concept is still the same because it works, and it works well. Dependable, versatile, convertible, and affordable describe this plow series perfectly.

3PT OR PULL TYPE CONVERTIBLE

Pull three pins and the OFDP-55 and OFDP-55HD pull type tile plows are a Category III 3PT plow making the O’Connell 55 Series the most versatile and compatible tile plows in the industry.

PARALLEL LINK, ZERO PITCH FOR ACCURATE GRADE CONTROL

The O’Connell 55 Series parallel link assembly allows for zero pitch, the most accurate tile placement in the industry. With zero pitch, the tile is discharged at the same depth as the tip of the shoe, the depth grade control indicates.

An easy to operate, affordable pull type commercial tile plow with the best service in the industry. More accurate grade control, pitch and elevation. Self-Propelled Commercial Tile Plows control both pitch and elevation to accurately discharge tile in the bottom of the trench; now you can have the accuracy of a commercial plow at the drop of a pin. No worrying about soft bottoms, extreme angles, or going through waterways and ridges. Slope and elevation control, the best of both worlds, just like the real professionals.

DUAL LINK CONTROL

The most accurate way to lay tile is with pitch and elevation. O’Connell’s Dual Link series plows utilize lift cylinders to control elevation and the pitch cylinders to control slope. Combining the accuracy of dual link with O’Connell’s expert design creates the easiest pulling, simplest commercial plow on the market today.

The 45 Series 3PT Economy Tile Plow is the most affordable tile plow, perfect for the farmer wanting to install tile economically. Designed for a Category 3 3PT Hitch, the Economy Tile Plow is perfect for shallower tile installation such as: laterals in a pattern tile application, along water ways, and draining wet spots in fields.

PULL WITH A LARGE 2-WHEEL DRIVE TRACTOR

The Economy OFDP45-3PT can be pulled by a large two wheel drive or small front wheel assist tractor. It is recommended that a tractor with a weight of at least 16,000 pounds be used. In lighter soils, smaller tractors may be used.

ASTM F449-02 6.5 COMPLIANT

Lay tile as recommended by the ASTM. All O’Connell plows and Quick Attach Trailing Boots comply with ASTM F449-02 6.5 for correct tile placement and proper bedding of the soil.