The K-Tec 1237ADT Train maximizes efficiency by utilizing a single power unit and operator to tow two 1237 scrapers. Ideal for job sites with extended cut zones and haul roads, it offers a significant advantage with a tandem heaped capacity of 74 cubic yards. Delivering exceptional production performance, the 1237ADT Train also provides the flexibility to split into single units as site conditions evolve.
The Ashland 950XL2 has a history of proven performance that you can rely on for all your agricultural applications. Designed to be pulled by your front wheel assist tractor, the 950XL2 is Ashland’s smallest ejector scraper for your farm and field. Its narrow width allows for maneuverability through feedlot gates and other tight areas where you need to move dirt. The extra wide front gate opening allows for bulky material to easily be ejected so you don’t have to deal with unloading frustrations. This is especially beneficial when repairing field washouts and levee erosion. The 950XL2 is also equipped with four new all-non-skid (ANS) tires ideal for holding grip on slopes when you are working on levees and ditches. These aggressive tires are seated on robust rims with solid cast hubs and oversized spindles for maneuvering over tough terrain.
The 140XL2 is Ashland’s most robust mid-sized dolly wheeled ejector scraper. Whether you own an articulated 4WD or row crop tractor, this scraper offers you big performance at an excellent value. The 140XL2 is popular for farmers or small contractors creating waterways, new pond construction, or other earthmoving projects around the farm. The tiltable ejector rack provides spacious room for top loading with an excavator or wheel-loader if your project demands. With the 140XL2 you will also achieve a smoother cut at a faster loading speed because of the long pole and low connection point of the ball and socket system. In order to stabilize the scraper while loading, the dolly wheel system of the 140XL2 is designed with the ball connection point in-line with the front axle. This design reduces the weight transfer off the rear wheels while loading so that you can limit duck walking..
Also offered in LGP Edition
140Xl2 LGP is designed for customers who need greater flotation in soft conditions. The 23.5 x 25 OTR rear tires have a longer rolling radius to keep you moving when the going gets tough.
When it’s time to get the job done right and get it done fast, look no further than the 155XL2. Able to be pulled with less horsepower than larger scrapers but still maximizing on capacity, this scraper is sure to make quick work of ditch clearing, water management, field prep and more. As a dolly wheeled unit, the 155XL2 doesn’t require a special scraper drawbar, making it a simple scraper to hook up to any tractor and get right to work.
Rowse 3002 Hydraulic Scraper is designed for loading with smaller horsepower tractors but built tough for use with larger tractors, too. The scraper’s 8′ wide cutting edge is wider than its wheels, and when teamed with a single rear wheeled tractor, it lets you cut or fill close to existing structures or fences. The main hinge pivots are 2¼” cold rolled shafts with bronze bushings. Two double-acting hydraulic cylinders with 1½” chrome shafts position the scraper for loading, carrying and dumping.
Rowse Model 500 and Model 700 Scrapers are designed for use with two or four-wheel drive tractors. All have a gooseneck hitch to allow 90° turns for easy maneuverability.
These scrapers feature heavy-duty rectangular steel tubing frames for strength and stability.
The main hinge pivots are 2¼” cold rolled shafts with bronze bushings. Two double acting hydraulic cylinders with chrome shafts (2″ Model 500, 2″ Model 700) position the scraper bucket. A depth gauge is standard on the 500 and 700 models.
A 3-piece frost blade attaches to a double reinforced bucket edge for maximum strength. The 8′ cutting blades are removable on the 500 and 700 models, reversible and made with road grader-type steel. With fingertip operation from your tractor seat, the precise hydraulic control gives you an adjustable load or spread depth from 4″-12″.
The 500, 700 model scrapers are protected by a shear pin in the tongue should it strike an immovable object. All Rowse Scrapers are equipped with transport stops for safe transporting behind a pickup at highway speeds.
The Ashland 175XL2 was built to make the most of your valuable time, prepping your land for maximum production. You can reshape waterways, repair washouts, expand holding ponds, and create a new building pad on your property. The 175XL2 is the largest front dolly wheeled scraper within the Ashland lineup. The machine is built for maintaining and improving the most valuable asset you own, your land. The 175XL2 also transfers very little weight to the tractor ,which allows you to use a standard tractor drawbar. The 29.5 x 25 OTR rear tire keeps the rear of the scraper climbing up onto soft conditions.
For customers who do larger dirt jobs with MFWD tractors, the 140TS2 and 140TS2-LGP Edition are the perfect fit. This 14 cubic yard (10.7 cubic meter) ejector scraper is the smallest direct mount scraper that Ashland offers. This scraper is sized correctly to provide maneuverability, and hauling capacity, at a lower horsepower requirement. With 25% tractor to 75% scraper weight transfer ratio, Ashland direct mount scrapers require less HP than traditional dolly wheel scrapers, which means it is easier and faster to load which require less effort for the operator.
Also offered in LGP Edition
140TS2 LGP is designed for customers who need greater flotation in soft conditions. The 23.5 x 25 OTR rear tires have a longer rolling radius to keep you moving when the going gets tough.
The Ashland 1410E is a rear lift ejector scraper. This design allows the floor of the scraper to remain nearly flat while loading, making field drainage and ditch clearing a simple task. The side router blades extend beyond the blades to funnel material into the bowl while you are loading the scraper. The forward-placed router blades and flat floor angle are beneficial when loading loose material while you are levelling the ground for irrigation. The 1410E is the only rear lift ejector scraper that Ashland builds. The combination of extended sidewall router blades and the rear lift allows the floor of the scraper to be flat while loading. This makes loading looser material such as sand or dry topsoil an easy task. The 1410E is also only direct-mount scraper that comes standard with a Category 4 Ag Hitch for short-term scraper operations. We recommend purchasing the optional scraper hitch for the 1410E and the specialized tractor drawbar if your project is more extensive.
If you have a large MFWD or smaller articulated 4WD tractor, the Ashland 155TS2 scraper fits the bill. You will also benefit from the additional capacity over other agricultural earthmovers with the structural strength of a construction-grade scraper. The narrow width of 155TS2 is ideal when working in tighter areas with MFWD tractors. Despite being very maneuverable, this scraper’s large rear tires, 15.5 cubic yard capacity, and large gate opening are perfect for quickly loading heavy clay, transporting up steep slopes, and unloading where you want especially when working on projects like pond and terrace building. A rear pushbar extension helps you through the most challenging conditions. The tiltable ejector rack increases the opening when top loading. Viewing windows on the front gate and the ejector rack for better visibility. If your jobs are more extensive and you need to do more with your Ashland155TS2,you can always purchase a lead unit for tandem scraper operation. Depending on the job and your power unit, your production will nearly double with the same equipment.
Runge Equipment Inc © 2024. All Rights Reserved
