FX-318 Rotary Cutter
Schulte’s first 18 foot flex wing rotary cutter has three sets of rotors
An ultra narrow transport width makes moving this unit extremely safe and simple
Run with the same HP tractor as most 15’ flex wings, but gain the extra 3’ cutting width
Excellent choice for mowing crop residue, pastures, weeds, orchards and roadsides
Single 7 gauge domed deck sheds water and debris and increases life of the rotary cutter deck with this easy clean feature
Available 540rpm or 1000rpm
Heavy duty gearboxes & drive system with spun formed 7 gauge stump jumpers ensures durability & perfect balance on the rotary mower
FX 1200 Rotary Cutter
- Our medium duty, 10 foot, rotary mower.
- A single domed 7 ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling and rusting and helps shed debris.
- 6.5 ” blade overlap and high blade tip speeds.
- A four gearbox drive line with independent slip clutches. The FX-1200 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260hp. The center and wing boxes have 1 3/4 ” 20 spine input shafts,2 3/8 ” down shafts and are rated at 210hp.
- An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5. The driveline on the rotary cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service.
- Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
- Available in 540 or 1000rpm drive.
FX1800 Rotary Cutter
- Our medium duty 15′ flex wing, rotary cutter
- A single domed 7 ga continuously welded deck makes this rotary cutter extremely easy to clean, prevents water pooling and rusting and helps shed debris.
- 6.5 ” blade overlap and high blade tip speeds.
- A four gearbox drive line with independent slip clutches.
- The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260 HP . The center and wing boxes have 1 3/4 ” 20 spine input shafts, 2 3/8 ” down shafts and are rated at 225 HP.
- An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service.
- Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
- Available in 540 or 1000rpm drive.
RS320 Jumbo Rock Picker
- RS320 Rock Picker features an extra large 3.2 cubic yard hopper for greatly increased rock removal efficiency. The RS320’s hopper has twice the capacity of an average rock picker hopper.
- The RS320’s new T-iron tapered grate with 3/4” bottom and 1/2” top material virtually eliminates all small rock jamming. And the 48″ grate which is 17″ longer than most reel type rock pickers on the market picks 50% less dirt and trash than reel types because it allows more time to sift the soil out before the rock enters the bucket.
- Large, flotation type, all-weather 16.5L x 16.1 tires are mounted on high capacity eight bolt wheels and hubs.
- The RS320 Rock Picker removes surface rock from 2 to 28 inches diameter.
Giant 2500 Rock Picker
- Large 2.5 cubic yard hopper.
- Durable tapered T-iron grate with 1-1/2” thick teeth eliminates jamming while allowing soil to sift through for clean rock picking.
- Batt tubing has 3/8” thick walls.
- Wrap around, hard surfaced batt teeth offer strength and wear resistance.
- Large heavy wire springs hold batts firmly in position and cushion shock loads. Spring coil diameter is reduced at the ends to minimize the possibility of breaking the spring hooks.
- Floating grate protects the machine from damage due to large immovable rocks.
- Pivoting hitch pole allows the rock picker to be quickly moved from the offset picking position to a centered transport position.
- Large 16.5L X 16.1 tires provide superior flotation
SRW-1400 Windrower
- Transports at an ultra narrow width of 93” .
- Windrows 2” to 25” rocks with ease, forming them into neat uniform rows.
- Power is supplied to the windrower drum via a heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads.
- The SRW-1400-H is hydraulically powered requiring a minimum of 15 GPM flow.
- The #100 drive chain is totally enclosed for longer service life.
- The rock windrower drum is 14 feet wide and is constructed of 8 5/8 inch heavy wall HSS tube.
- Hardened 450 BHN, hard surfaced, steel are 5/8 inch thick x 6 inch long. Reversible, replaceable teeth are bolted to the drum pipe, resulting in problem-free operation even in difficult conditions.
SRW-1000 Windrower
- The SRW1000 rock windrower windrows 2” to 25” rocks with ease, forming them into neat uniform rows.
- Power is supplied to the windrower drum via a heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads.
- The final drive chain is totally enclosed for longer service life.
- The windrower drum is 10 feet (3.05 M) wide and is constructed of 8 5/8 inch (219mm) heavy wall HSS tube.
- Hard surfaced, 5/8 inch (15.9mm) x 6 inch thick (152.4mm) long teeth are welded directly to the drum pipe, resulting in problem-free operation even in difficult conditions
- This rock windrower is a good choice for RM’s and Counties for gravel reclamation