The versatility of Rowse Scrapers allows you to move dirt, level land, dig holes, clear areas and drain or fill low spots. The complete operation is controlled by one single-spool, double-acting hydraulic control valve.
Heavy-duty rectangular steel tubing frames
2¼" main hinge pivots
3-piece frost blade
Removable and reversible 8' cutting blades
3002
Rowse 3002 Hydraulic Scraper is designed for loading with smaller horsepower tractors but built tough for use with larger tractors, too. The scraper's 8' wide cutting edge is wider than its wheels, and when teamed with a single rear wheeled tractor, it lets you cut or fill close to existing structures or fences. The main hinge pivots are 2¼" cold rolled shafts with bronze bushings. Two double-acting hydraulic cylinders with 1½" chrome shafts position the scraper for loading, carrying and dumping.
3002 Specifications
| Model 3002 | |
|---|---|
| Capacity, heaped | 3 cubic yards (approx.) |
| Width of Cut | 95 3/4" |
| Overall width | 111" |
| Box Width(front to rear gate) | 43" |
| HP Requirements | 50 and up |
| Weight | Approx. 2000 lbs |
| Hydraulic Requirements | One double-acting control valve |
| Blade | Removable, high carbon steel (3-piece carbon steel frost blade) |
| Tires | 95L 6, PLY included with scraper |
5002 & 5004
7002 & 7004
Rowse Model 500 and Model 700 Scrapers are designed for use with two or four-wheel drive tractors. All have a gooseneck hitch to allow 90° turns for easy maneuverability.
These scrapers feature heavy-duty rectangular steel tubing frames for strength and stability.
The main hinge pivots are 2¼" cold rolled shafts with bronze bushings. Two double acting hydraulic cylinders with chrome shafts (2" Model 500, 2" Model 700) position the scraper bucket. A depth gauge is standard on the 500 and 700 models.
A 3-piece frost blade attaches to a double reinforced bucket edge for maximum strength. The 8' cutting blades are removable on the 500 and 700 models, reversible and made with road grader-type steel. With fingertip operation from your tractor seat, the precise hydraulic control gives you an adjustable load or spread depth from 4"-12".
The 500, 700 model scrapers are protected by a shear pin in the tongue should it strike an immovable object. All Rowse Scrapers are equipped with transport stops for safe transporting behind a pickup at highway speeds.
5002 & 5004 Specifications
| Model | |
|---|---|
| 5002 | 5004 |
| Capacity, heaped | 5 cubic yards (approx.) |
| Width of Cut | 95 3/4" |
| Overall width | 113" |
| Box Width(front to rear gate) | 48" |
| HP Requirements | 70 and up |
| Weight | Approx. 4000 lbs |
| Hydraulic Requirements | One double-acting control valve |
| Blade | Removable, reversible, 3-piece high carbon steel (8" wide front blade) |
7002 & 7004 Specifications
| Model | |
|---|---|
| 7002 | 7004 |
| Capacity, heaped | 7 cubic yards (approx.) |
| Width of Cut | 95 3/4" |
| Overall width | 113" |
| Box Width(front to rear gate) | 48" |
| HP Requirements | 85 and up |
| Front dump spreading depth | 4"-12" |
| Weight | Approx. 5000 lbs |
| Hydraulic Requirements | One double-acting control valve |
| Blade | Removable, reversible, 3-piece high carbon steel (8" wide front blade) |
| Tires | 50 psi 12.5 L x 16, 12- ply or 14 ply |